- Gears, ribs and interior shapes

Carving of gears, ribs and interior figures

Specialists in gear cutting by generation and in the mortising technique, with which we can machine splines, keyways and flywheels; contour cams, plates, levers, or cut gears.

Short and medium series

We are able to build, to drawing, parts in medium and short series. Depending on the needs of each project, we can use different processes ranging from single machining on a conventional lathe to more complex machining.

Specialization in unitary piece

We are highly specialized in the manufacture of highly complex unitary parts.

CAPABILITIES AND MEANS

PRODUCTIVE

Mortising machines, broaching machines, specific milling machines in which mortisers are coupled for this purpose, lathes... We have machinery that allows us to work both for large and small parts.

01 Exterior Milling and GrindingSpur gears, helical gears, racks, bevel gears, spiroid bevel gears, worm/sprocket gears and chain sprockets.
From M-0.5 to M-34

02 Interior carvingsHigh kinematic centers 17 m/sec and speed 20,000 rpm 5th axis in continuous operation.
4th axis milling machines, dimensions up to 14,000 mm x 5,000 mm x 3,000 mm with benches for workpieces up to 80 Tn.

03 Keyways, Internal Ribbing and Flat FacesBoth blind keyways and ribs 1,500 mm, as well as through-bolts up to a maximum length of 3,500 mm
From 3 mm up to a width of 500 mm

04 Spline and Ribbed ExteriorRibbed shafts Ø max 1,000 mm and maximum rib length of 4,000 mm
Grinding up to length 1,000 mm

05 Carved by Power SkivingFor high precision gears. Maximum efficiency, excellent surface quality and tight tolerances. An optimal solution for complex geometries and demanding production.

Tell us what you need, and we will contact you as soon as possible to prepare an offer tailored to your needs.

...CONTACT US

CAPABILITIES

Wide range of materials to be machined

We machine on any type of steel available in the market, as well as on other materials with a high degree of specialization in bronze, graphite, silicon aluminum, inconel, special plastics, etc.

Gears, ribs and interior shapes

We carry out very specific works in exterior and interior milling both by generation and by tooth by mortising. We specialize in work inside parts in keyways, ribs, flat faces, angular heads or EDM.

>Go to Gears, ribs and internal shapes

Metrology and Quality

We have our own Metrology and Quality unit that supports manufacturing under various certifications, and with which we can also verify both parts and assemblies.

>Go to Metrology and Quality

Laser Cladding & Hardening

We repair parts and manufacture spare parts by sample, drawing or reverse engineering using CMM and blue laser scanning. In addition, we can generate a complex profile from sample part by machining, 3D Printing or with our Laser Cladding & Hardening cell.

>Go to Laser Cladding & Hardening